Currency

Cùm treo 3 chân 1 tấn model KONDO

Thời gian giao hàng: Vui lòng liên hệ 0988.324.548 / 0906.040.453

Tình trạng: Hàng mới 100%

Giá: Liên hệ

Hiệu lực giá bán:

Model: KONDO
Tải trọng: 1 tấn
Dùng cho ống phi 48mm
Xuất xứ: Nhật bản

Tags:

Descriptions
Specifications
Download
Blogs

Installation of tripod

(1) Assemble the tripod top cap in sequence (completed at the factory). Figure 1

(2) Put the assembled top cap upside down, loosen the support tube locking screw, and turn the Insert the 3 support tubes into the innermost part of the socket (picture 2) and tighten the screws.

(3) When choosing a double-section support pipe, firstly connect the support pipe A and the support pipe B to the connecting piece through the fixing pin (Fig.3) Then follow step 2 to install.

(4) Tighten the nuts on the three sockets in turn, and the sockets and the load-bearing plate can move freely.

(5) Choose a flat ground and stand up the assembled tripod. Ground a support tube into an equilateral triangle Evenly distributed (Figure 4), confirm that the tripod is firm and stable.

(6)Hang the chain hoist or electric hoist in the lifting ring and verify that there is no problem before hoisting and use.